Complete Aqua-Flo FMHP wet end assembly designed for 2.0HP pump configurations with 1-1/2" x 1-1/2" plumbing connections (threads measure approximately 2 3/8" across). This side discharge wet end pairs with 48 frame motors rated at 10.0 Amps at high speed on 230V systems or 16 Amps on 115V systems.

This replacement wet end accommodates both single-speed and dual-speed motor configurations. The discharge orientation can be adjusted 90 degrees by rotating the volute to match your installation requirements.

Your complete wet end package contains all essential components: volute housing, mechanical seal, impeller, wear ring, suction cover with O-ring, drain plug with O-ring, and mounting screws for the suction cover.

Important Sizing Guidelines: Always select your horsepower rating based on your motor's actual amperage draw. For 48 frame motors: expect approximately 5-1/2" diameter across the motor body, 1/4" thru-bolt heads, and roughly 5-3/16" spacing between thru-bolts measured diagonally. In comparison, 56 frame motors measure about 6-1/4" across with 5/16" thru-bolt heads and approximately 5-7/8" diagonal thru-bolt spacing.

Compatible with PS-200 shaft seals featuring 5/8" shaft diameter with Buna material for Aqua-Flo applications.