This is a full Aqua-Flo Flo-Master FMCP wet end assembly rated for 1.5HP with 1-1/2" x 1-1/2" ports (thread diameter measures approximately 2 3/8" across). Features center discharge configuration designed for 48FR pump motors. Compatible with 48 frame motors drawing approximately 9.0 Amps at high speed on 230V systems or approximately 13.0 Amps at high speed on 115V systems. Works with both single-speed and dual-speed motor configurations. The discharge outlet can be rotated 90 degrees for flexible plumbing positions. This complete assembly includes: volute body, shaft seal, impeller, wear ring, suction housing, suction housing o-ring, drain plug with o-ring, and mounting screws.

Important Selection Guide: Always verify horsepower compatibility by checking your motor's amperage rating. The 48 frame motor dimensions are approximately 5 1/2" diameter with 1/4" thru-bolt heads spaced about 5 3/16" apart (measured cross-pattern). Compare this to 56 frame motors which measure approximately 6 1/4" diameter with 5/16" thru-bolt heads spaced about 5 7/8" apart cross-pattern.

Compatible Replacement Components:
Shaft Seal PS-200 for 5/8" Shaft, Buna Material - Fits Aqua-Flo Assemblies