Genuine replacement 2.0HP impeller designed for Aqua-Flo 48 and 56 frame wet end assemblies. This premium impeller features precise specifications: 2 1/8 inch eye diameter, 1/4 inch vane width, and 4 3/8 inch outer diameter. Part number 91694200.
Electrical Performance: When paired with a 2.0HP motor, expect approximately 10.0 amps at high speed on 230V systems, or 16.0 amps at high speed on 115V configurations.
Compatible Wet Ends: Installs between the face plate and volute housing on Aqua-Flo XP2 and FMXP2 wet end models. We strongly recommend replacing your seal kit (PS-200) during impeller installation for optimal performance.
Frame Identification Guide:
- 48 Frame: Motor mounting bolts measure 3 5/8 inches between centers (5 3/16 inches in X-pattern) with 1/4 inch bolt heads
- 56 Frame: Motor mounting bolts measure 4 1/8 inches between centers (5 3/4 inches in X-pattern) with 5/16 inch bolt heads
Important: Installing an oversized impeller will cause motor overheating and potential damage. Always match impeller horsepower to your motor's rated capacity. Reference amperage readings to verify proper HP selection.
Reference Chart - High Speed Amperage by HP:
1.0HP: 115V = 11-12 amps | 230V = 8 amps
2.0HP: 115V = 15-16 amps | 230V = 10 amps
Non-returnable item - please verify all specifications match your existing equipment before ordering.
