This factory-installed Aqua-Flo XP2e jet pump delivers powerful hydrotherapy and straightforward replacement for homeowners comfortable with DIY spa maintenance.
Specifications: 4-5HP rating, 56 frame motor, 230V operation, side discharge wet end featuring 2" suction and 2" pressure connections (approximately 3" edge-to-edge measurement).
The motor label displays 15.0 amps on high speed and 4.8 amps on low speed, placing this unit in the 4-5 horsepower range according to standard amperage charts. While this robust pump offers exceptional power, ensure your electrical wiring is properly sized before installation. Inadequate or undersized wiring may cause system failures when running high-amperage equipment like this model.
Voltage Verification: Confirm your voltage requirements by examining either the pump label (marked 115V or 230V) or locating the white wire connection in your control pack. For 230V operation, the white wire connects to the red leg or #2 leg; for 115V, it connects to the neutral or white AC leg. Always disconnect power at the breaker before performing any inspections.
Key Pump Benefits:
- Precision-engineered impeller design ensures optimal water circulation and peak hydrotherapy performance
- 2" intake and discharge ports
- Durable 56-frame motor construction
- Thermal protection system safeguards motor longevity
- Available in continuous duty ratings: 1.5hp, 2.0hp, 3.0hp, 4.0hp, and 5.0hp in single or dual speed configurations
Amperage Reference Guide: Check your motor label for amperage ratings (dual speed pumps show two values like 10.0/3.5, where 10.0 represents high speed).
8.0 amps = 1 HP
10.0 amps = 2 HP
12.0 amps = 3 HP
14.0 amps = 4 HP
16.0 amps = 5 HP
Important: Always reference the amperage rating on the motor label rather than the stated horsepower, as amperage provides the accurate performance specification.
