Skip to main content

Spa Parts Made Simple

Pumps, heaters, control boards, and replacement parts — without the confusion.

Shop Spa Parts
✔️ Real OEM & compatible spa parts
✔️ Fast shipping from the USA
✔️ Knowledgeable support when you need it
✔️ Trusted by spa owners since 2015

Not sure which part fits your spa?

We make it easy to find the right replacement part — without guessing.

  1. Find your spa model
  2. Match the part number
  3. Order with confidence
Get Help Finding a Part

SpaShopper makes it easy to find quality hot tub and spa replacement parts without the frustration. From spa pumps and heaters to control boards, jets, filters, and plumbing components, we stock parts that fit a wide range of popular spa brands. Whether you’re fixing a heating issue, replacing a worn pump, or upgrading aging components, SpaShopper helps you get your spa running again quickly and confidently.

Waterway Executive Wet End 56 Frame All Horsepowers.. See the next 2 pictures for the Suction Fitting Size Variation measurements.. There is a 2" and 2 1/2" Version. Be sure you know which one before ordering..

Waterway Executive Wet End 56 Frame

SpaShopper

MSRP: $156.95
$124.95
(You save $32.00 )
(No reviews yet) Write a Review
SKU:
WW-EXEC56-WE
Adding to cart… The item has been added

The ever popular Waterway Executive wetend available in your choice of frame and suction sizes.

This wetend has been used by virtually all spa and hot tub manufacturers from 1998 forward. Common to find on Hydro Spas, Vita Spas, Dynasty Spas, Pilates H2O, Garden Leisure, L.A. Spas, Leisure Bay Spas, La Z boy Spas, St.Lucia spas, Platinum Spas, Legend Spas, Keys Backyard, Icon Spas and many many more.

Easily identified by 8 Phillips head screws on the wetend faceplate and wetend will have part number 315-1220 stamped on the back of it.

The 56 frame wetend will have thru-bolt mounts that have a vertical measurement of roughly 4-1/4" center to center.

If you get under 4" (3-5/8") then you will need the 48 frame version found under Product Code: WW-EXEC48-WE

  • 56 Frame, Side Discharge wetend
  • Choice of 2" or 2.5 " suction for greater water flow and performance
  • Wetend is adjustable to one of 3 positions
  • 6 1/2" diameter wetend for greater head pressure
  • Viton Seals
  • Great replacement for many discontinued wetends

AKA/Replaces: 310-1710, 310-1720, 310-1730, 310-1740, 310-1750, 310-1460, 310-1480, 310-1500, 310-1440, 310-1510

Please Note: The 2" suction and discharge measures 3" across the male threads and the 2.5" suction will measure 3 5/8" across the male threads. Gasket sent are universal flat gaskets Product Code: Flat Gasket, 2", Pump Union, Heater Union .

You must have a 16 amp motor for the 5 HP version.  

If you need a hand locating the proper horsepower please contact our technical support team with amperage and voltage of your motor, this will ensure proper horsepower is selected and doesn't overload your motor. It is very common to find uprated horsepower markings on these pumps and wetend

You must go by the Amperage Sticker on the motor not stickers on the Wet End or Motor especially the BHP Stickers. 
Look on the label of the motor for the two amperages if you have a 2 speed pump or if its a single speed look for a single amperage. An example will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
115V Chart Below
3/4HP 8-9 Amps
1HP 11-12 Amps 
1.5HP 16-17 Amps 
2HP 19-20 Amps. 2HP would be very rare. 
 
230V Chart Below
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told incorrectly that they have 5 HP pumps.
If you do the math two 230V 5 HP pumps at 16 amps is: 32 amps. Plus a 5.5 KW heater is: + 21 amps.  
That means with both pumps running and the heater on it will draw  = 53 AMPS. 
I bet your HOT TUB is on a 50 AMP breaker…... Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump. 

 

!