The Vico / BWG Ultima Ultra Jet circulation pumps use a space saving 1/15th HP motor (previously 1/12th HP) that provides optimal circulation for spas and hot tubs. The Ultima wet end is equipped with 3/8" barbs for use with an optional heat jacket (Barb needs to be drilled out if needed). 1-1/2" union fittings (2-3/8" thread diameter) with center suction and side discharge. The wetend is adjustable to one of three positions.
New redesigned versions of this pump now have a capacitor on the top of this motor which could play a part in your install if its in a tight spot.
| Accessory Pump Type | Circulation |
| Manufacturer | Balboa Water Group |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115v |
| Suction Style | Center |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Side |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Horsepower | 1/15hp |
| Motor Frame | 48 Frame Thru-Bolt |
| Motor Amperage/Wattage | 1.3A |
IMPORTANT MOTOR VARIATION NOTICE
Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.
If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.
Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.
