IMPORTANT: This component has been discontinued by the manufacturer.

This 2 horsepower impeller is engineered exclusively for Jacuzzi/Carvin wet end assemblies. Compatible with motors running approximately 16.0 Amps at 115V or 10.0 Amps at 230V operation. Originally equipped on Thera-Max and Thera-Flo pump systems found in Jacuzzi Premium J Series spas, Sundance hot tubs, select HotSpring by Watkins models, and various other brands.

Identification tip: Check your wet end face plate for cast markings indicating Jacuzzi or Sundance branding near the pressure side discharge outlet.

REPLACEMENT NOTE: The substitute impeller may differ in appearance from your original component but maintains full compatibility with your pump housing. Verify fitment by matching motor amperage specifications (approximately 10.0 Amps).

This closed-face design serves Piranha series circulation pumps manufactured by Jacuzzi. Requires installation on a 2.0hp minimum thru-bolt motor configuration within Piranha, Thera-Max, or Thera-Flo pump bodies.

Technical Specifications:
Impeller Type: Closed Face
Impeller Diameter OD: 3-7/8"
Vane Width ID: 9/16"
Eye Diameter OD: 2-15/16"
Eye Length: 3/4"
Impeller Width OD: 7/8"
Seal Seat Depth: n/a
Shaft Length: 1-5/8"
Shaft Diameter OD: 5/8"
Seal Seat Diameter OD: n/a
Manufacturer: Jacuzzi/Carvin
Pump Application: Piranha, Theraflo, Theramax