Skip to main content

Spa Parts Made Simple

Pumps, heaters, control boards, and replacement parts — without the confusion.

Shop Spa Parts
✔️ Real OEM & compatible spa parts
✔️ Fast shipping from the USA
✔️ Knowledgeable support when you need it
✔️ Trusted by spa owners since 2015

Not sure which part fits your spa?

We make it easy to find the right replacement part — without guessing.

  1. Find your spa model
  2. Match the part number
  3. Order with confidence
Get Help Finding a Part

SpaShopper makes it easy to find quality hot tub and spa replacement parts without the frustration. From spa pumps and heaters to control boards, jets, filters, and plumbing components, we stock parts that fit a wide range of popular spa brands. Whether you’re fixing a heating issue, replacing a worn pump, or upgrading aging components, SpaShopper helps you get your spa running again quickly and confidently.

Universal CMP Spa Hot Tub Pump Wet End 2" X 2" 48 or 56 Frame 3 HP Barb Video How To This is an exact match for various AquaFlo XP2 models and will also replace Vico Ultimax, and Waterway Hi-Flo, EX2, and Super-Flo pump wet ends. This wet end is used with a 3.0hp, 48 or 56 frame thru-bolt style motor.

Universal CMP Spa Hot Tub Pump Wet End 2" X 2" 48 or 56 Frame 3 HP Barb Video How To

SpaShopper

MSRP: $149.99
$112.99
(You save $37.00 )
(No reviews yet) Write a Review
SKU:
HTP27203-300-000a
Adding to cart… The item has been added
You are buying a 3 HP 48 or 56 Frame Universal 2" X 2" Wet End / Pump complete with Barb, Silicon, Screws, Volute, Impeller, Seal, Face and the Wear Ring. This Wet End will work for a 2HP , 3HP or 4HP Motor To determine the HP refer to the chart below. This Wet End fits both 48 and 56 Fr Motors so it makes no difference which type motor you have. The 48 Frame will be 3 5/8" between or 5 3/16" in a X Pattern and the 56 Frame will be 4 1/8" Between or 5 3/4" in a X Pattern. NOTE: This listing is the Complete Wet End Only as pictured.NOTE: This listing is the Complete Wet End Only as pictured.
 
Note: This Wet End is a Side discharge, 2"mbt suction/discharge, 48/56 frame wet end by CMP. This wet end may be used as a low cost replacement for a number of different spa pumps. This is an exact match for various AquaFlo XP2 models and will also replace Vico Ultimax, and Waterway Hi-Flo, EX2, and Super-Flo pump wet ends. This wet end is used with a 3.0hp, 48 or 56 frame thru-bolt style motor. The motor used may be either a single or dual speed. The complete wet end includes: the volute, seal, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring and suction cover screws
 
Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump. 
Aqua-Flo, Aqua Flo, Aquaflo, Waterway, Starite, Sta-Rite, Sta Rite, Vico

 

Please Choose with Care as We Do Not Accept Returns.

We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..
 

 

!