Single pole thermostat rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new one
| Thermostat Type | Mechanical |
| Thermostat Application | Generic |
| Bulb Diameter | 1/4" |
| Bulb Length | 3-3/4" |
| Capillary Length | 36" |
| Thermostat Amperage | 25A |
| Electrical Connection | Slide Connector, 1/4" Male |
| Pole/Throw | Single Pole Single Throw (spst) |
