SpaShopper makes it easy to find quality hot tub and spa replacement parts
without the frustration. From spa pumps and heaters to control boards,
jets, filters, and plumbing components, we stock parts that fit a wide range
of popular spa brands. Whether you’re fixing a heating issue, replacing a
worn pump, or upgrading aging components, SpaShopper helps you get your spa
running again quickly and confidently.
Swim 56 5HP Impeller fits Guangdong 56FR WUA Video How To Swim Spa
This 5.0 Horse Power Swim 56 Impeller fits 56 Frame Pump Wet Ends manufactured by Guangdong LX Brand only that have the WUA500 marking only. The pump this impeller fits usually have the part number Swim 56 on the label. This impeller will not fit the WUA500B. SEE NOTES BELOW...Watch the video for instruction on how to install this part and also how to determine if this is the correct part.
It is about 4 13/64"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the sleeve in the back, it also measures 7/16" from the inside of the vane edge to edge. Some of these impellers have a number on them B323-01, B323-02, B323-03, B323-04, B323-05 if yours does you must measure the overall width of the impeller to get the correct one. They cast one implore with that number on it and they trim the impeller down to the different horse powers so be sure you do measure edge to edge... NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange see the video for how to tell the difference!
For Seal and Bearing kits that fit this impller Click the below links:
Note: This Impeller Fits Guangdong Chinese LX series Pumps only Some Pump Part numbers are as follows: (Swim 56)
NOTE: This Part will NOT Fit the WUA500B or Sundance®or Jacuzzi® Tubs with a Guangdong LX Wet End. For internal parts of the Jacuzzi and Sundance wet ends you already have, click hereJacuzzi® & Sundance® LX Parts
To Install this Impeller you will have to remove the face plate and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. Note: We offer parts & kits for this wet end and complete pumps in our store.
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
