This part is a 1.5 Horse Power 115V 13.8/3.8 Amp (2) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA1501C-II and or 6500-090 , 6500-345 , 6500-357 , 6500-845 on the label. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..
Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug Intertek LX 48 or 56 Frame Wet End Fine Threads Jacuzzi® or Sundance®
This model LX pump is commonly used to replace Sundance 2.0 HP 230 Volt 48 frame pump, 2 speed, 2" inlet, 2" discharge pumps
Dimensions: 17-1/2"L x 8-7/16"W x 8-7/16"H
NOTE: This Pump Requires a Base that wraps around the body of the motor to mount it.. Click here for the link to the bracket: Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame
| Motor Voltage | 115v |
| Speed | 2 Speed (2-Spd) |
| Motor Amperage/Wattage | 13.8A/3.8A |
| Horsepower | 1.5hp |
| Manufacturer | Lingxiao (LX) Pump |
| Pump Model | 48WUA |
| Suction Pipe Size | 2" |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Style | Center |
| Discharge Pipe Size | 2" |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Style | Side |
| Motor Frame | 48 Frame Thru-Bolt |
| Drain Plug Location | 3,6,9 o`clock |
