This kit is a Double Coupler (10) Barb 2" X 2" Slip X Slip X (6) 3/4" Barbs + 2" Street x Slip x (4) 3/4" Barb Manifold Deluxe Replacement Kit.
The Kit consists of (2) Manifolds total one with (6) 3/4" Barbs Slip x Slip and one with (4) 3/4" Barbs Street x Slip totaling 8 Outputs, (2) 3/4" Plugs to cut the manifolds down to 8 or 9 outputs, (1) 4oz Blue Glue and (1) 4oz Purple Primer and (2) 2" Couplers , (2) 6" Pieces of 2" Soft Pipe, (10) Barbed couplers, (20) 3/4" Clamps and 30" of Clear 3/4" Tube so you have about 3" per extension.
The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there.
The Manifold receives a 2" pipe or fitting on one side and then slips inside of the other manifold and then a 2" fitting glues in on the other side.
Note: This Kit features an Open End Manifold Connection that will be Slip on both ends when glued together..
We do offer this kit with a Dead End Manifold in this store..
