Vico Ultima Ultra Flo or Ultra Jet Pump Impeller
Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 4.0hp,which is between 12 and 14 Amps.. it is used in an Ultima, Ultra Jet and/or Ultra Flo pump wet end, and must be installed on a 4.0hp (or greater) thru bolt motor.
Click here for seal options for this impeller: Vico Pump Seals
This impeller can be used in place of the Power-Right Pump Impeller that has PR-400-5, PR-430-7F stamped in the back and PR565 on the front..
Closed face impeller made for the PRC9089X and PRC504 Pump by Power-Right. Rated at 2.5hp, the 9089X and 504 impellers must be installed on a 2.5hp (or greater) motor.
| Impeller Type | Closed Face |
| Impeller Diameter OD | 4-1/4" |
| Vane Width ID | 1/2" |
| Eye Diameter OD | 2-1/4" |
| Eye Length | 5/16" |
| Impeller Width OD | 3/4" |
| Seal Seat Depth | 1/16" |
| Shaft Length | 1-7/8" |
| Shaft Diameter OD | 11/16" |
| Seal Seat Diameter OD | 1-1/2" |
| Manufacturer | Vico/Balboa |
| Pump Application | Ultima, Ultra-Flo, Ultra Jet |
