This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Mini Oval Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.  

This complete retrofit spa pack VS-500 that can be hooked up 120/240V
Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep

Operates

• 2 Speed Pump 1 120/240V
• Circulation Pump 120/240V*
• Ozone 120/240V*
• Auxillary Hot Port 120/240V
• 12V Light
• 5.5KW Heater

*= Circulation pump and ozone must be matching voltage.

Includes:

• Mini Oval topside control panel ((in) 4.34 x 1.58 (cm) 11.02 x 4.01)
• Adapter plate 8 9/16" long X 3 1/2" Wide
• Light harness, wire, bulb and reflector.
• All necessary cords.

Features:
¥ 120/240v Pump 1 circuit
¥ 120/240v ozone circuit
¥ 120/240v Circ Pump circuit (30GPM minimum)
¥ 1.4/5.5kW heater
¥ 12v spa light circuit
¥ Patented M7 technology
¥ Plumb on pressure or vacuum side
¥ Component cords included
¥ Control panel included
¥ US & Canadian safety approvals

The Value Series (VS) family of Hot Tub Control Systems were designed using Balboa's patented M7 temperature and flow sensor technology and a new universal control platform. The systems have a plastic enclosure to eliminate water intrusion. Connectors are built onto the circuit board minimizing wires and simplifying service. The different models have controls for a single two-speed pump or an additional blower or pump. All models feature a convertible 120/240v power supply, a 1.4/5.5kW heater and can support mini, duplex, or standard digital control panels.