Here is your special opportunity to get a complete Cal Spa side discharge Vico Ultra Jet Ultimax Spa Pump in an OEM configuration. Replaces model numbers PUUM2302582F, PUUMC2302582FJ, 1016172, PUUM2302582F. Original specs are 230 Volt, 11.7 Amp, 56 frame. This two speed versions replaces single speed models, just wire up the high side only!
| Motor Voltage | 230v |
| Speed | 2 Speed (2-Spd) |
| Motor Amperage/Wattage | 12.0A/3.5A |
| Horsepower | 3.0hp |
| Manufacturer | Vico / Cal Spa |
| Pump Model | Ultimax |
| Suction Pipe Size | 2" (3" thread diameter) |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Style | Center |
| Discharge Pipe Size | 2" (3" thread diameter) |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Style | Side |
| Motor Frame | 56 Frame Thru-Bolt |
IMPORTANT MOTOR VARIATION NOTICE
Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.
If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.
Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.
