Description

The WUA400-2/6 is on an extended back order and we don't have an ETA for its arrival. We recommend using the standard WUA400-II model. The difference between the two is the low speed amps are 3.4 amps higher and have a slighly higher rpm on the standard version. You can find that model pump here: LX WUA400-II Pump Assembly, 56 Fr, 4.0 HP, 230 Volt, 2 Speed

NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II also there are variations as the the wet end union size.. There is a 2" x 2" , 2' x 2 1/2" and 2 1/2" x 2 1/2".. Make sure you know your confirguartion before ordering..

THIS PUMP IS A 2" X 2" Meaing it measures about 3" Edge to Edge across the threads on the wet end..

This is a rare pump.. 4 HP LX Spa Pump 2 Speed 230V 56WUA400-2/6

Powerful Water technology limited Two Speed LX SPA Pump:

This WUA series spa pump is 2 speed, 2-Pole/6-Pole pump designed for SPA usage in North America that can achieve to high-speed for massage and low speed for filter and cycle functions. This pump runs at lower RPM (1150) resulting in cooler running temps, longer pump life and lower consumption. 2 inlet and outlet for high-performance and low-noise perfected for SPA systems. Mechanical seal type ensures watertight for long-time continuous operation. WUA series is recognized and accepted products by SPA manufacturers.

Features

Eliminates the need for a separate circulation pump and plumbing.
Runs at lower RPM (1150) resulting in cooler running temps, longer pump life and lower consumption.
NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II

**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**

Additional Information

Cord Type	NONE
Voltage	230
Horsepower	4
Discharge Location	Side
Discharge Size	2" MBT
Frame Size	LX56
Number of Speeds	1
Frequency (Hz)	60
High Speed (Amp)	12
Lo Speed (Amp)	1

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump!

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..